Paul,

 Here are some pics of the plenum.  I have several holes in it resolving
 clearance issues.

 The MAF sensor is included and the whole thing has covers and is removable.
 Fitting
 the injectors is hard on the injectors as i will need new o rings and one of the
 plastic rings at the top came off.

 Joe Berki.

 Does the air have to make a 180 degree turn?



 Paul Lamar

Paul,

The air actually does a 180 from the scoop to the plenum, Tried to expand it from the
inlet to the plenum.  It then goes through the MAF and does a 180 to the intake
runners.  There is no space on this side and the augmenter does not permit going over
the top.  I am not counting on ram air and the engine is pulling a vacuum.  Am I
missing something?

Joe Berki

Do you have space to go out to the wing root?

Paul Lamar

-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.