Exhaust holes closed!

It turned out that these holes are accusable from below coming through the rotor
housing aluminum. I just taped a 3/8x24 thread into it and closed it with a 3/8” long
set screw. Did not have to touch the steel insert.
That was a quick and dirty fix.
Thanks everyone for all the good response.

Hopefully no more oily belly on the airplane.

Richard Sohn
N2071U

http://www.fairpoint.net/~res12/home.html


-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.