Anyone got a rotary project within reasonable driving distance of
  Kerrville, Texas they wouldn't mind showing me, i have a slim chance of
  leaving TX tomorrow but more than likely leaving sometime Monday

  Alex


 Alex,
 There's two rotary a/c at Lockhart.  We will both be there tomorrow,
 Saturday.  You're welcome to stop by.  Stop at the Plane Talk hangar and
 ask for Bobby or Mark.

 Mark


Thanks Mark,I pulled the trigger and bought Milo's p port renesis FWF in
Kerville, I thought I would see what everyone else was doing on their
projects while we waited for the money to clear on the transfer but we left
friday as it cleared earlier than expected,

If we in the region again I'd like to take you up on your offer

All the best,

Alex

I did some of the wiring and the RX8 coil heat sink on that Alex.
The basics idea was to keep the sensor, ignition and fuel injection harnesses separate.

If you need any help don't fail to let me know. I don't think it is a p-port unless he changed it. It was not a P-port when I worked on it.
Send a picture when you get a chance.

Paul Lamar