This uses a 1.5 inch OD .125 wall 4130 tube for the nose gear
strut. It is bent at a 45 degree angle with a 10 inch radius.
You need to search Google for a short 2 inch air cylinder
for the damper. The latest trick in shocks is to use a separate reservoir
and the ID of the small tube connecting the two controls the damping.
BTW Zero manufacturing makes some great oil pans.
---------------------------------------------------------
These cylinders might work. Connect the upper port to
a pressure can with small tubing. Fill the can about half way with
hydraulic fluid. The remaining air in the can will serve as the spring.
A two inch stroke might be about right.
BTW I just discovered Linux and my display will do this.
Very useful when it comes to screen captures of web pages.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.