Henry NeeThanks Henry, I will see if that changes anything. Right now I am
trying to build the intake, which
isnt that difficult. Keeping it under the cowling, a bit harder.

So goes progress!

KA

I have a cash sale on slide throttle kits.

$150

Paul Lamar

-
I think this slide throttle will interfere with my turbo. My p port inserts stick out 2.25 inches
from the rotor housings, and they are so close to my turbo I am having trouble getting the 180
degree bends to fit. I am adjusting the adapter for the turbo to turn it around backwards- i.e.
  cool side toward the front. This would simplify the exhaust routing.

I have a turbo throttle body that I modified (only left the butterflies) that I might use, or I may
go the route Tracy used and get the large single large butterfly. If I go 1/2 inch larger than the
turbo inlet and keep this size until just before the turbo, I think it will fit. Maybe.

Kevin Alderman


Forgot about the turbo.

You have plenty of room to use an exhaust spacer and move the turbo outboard.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.