New Subject,
Does anyone have a dimension-ed drawing for a 3:1 reduction box
modeled on Tracy's Box?

Milo

This is what I have so far.

Paul Lamar

I measured mine up for CAD drawings before I assembled it, but with
the holidays I haven't had time to draw it. I will get to it shortly.

Kevin Alderman

Kevin, would appreciate a copy.  I think it is time to do a 3:1
drive. Would like suggestions from one and all on the appropriate
gears by part number if possible.  Also design concepts as well,
like integration with the standard bell housings to keep the costs down.

milo

If you build it like this you can use a relatively cheap constant speed
hydraulic prop.

I forget the attachments.

Paul Lamar

I do that also. I thought they were grey hairs overcoming me, but there is
some evidence they may be blonde:-))).

Dale Davies


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.