Subject: Progress on 20B turbo compound using 450 HP DD15 parts
From: rotaryeng
Date: 1/3/2013, 2:12 PM
To: AAAA-rotaryeng

I found a local Detroit Diesel repair shop and actually saw
the real thing. The shop is called "Big T's" 805 983 2408.

http://www.bigtsftln.com/default.htm
tmaloney@bigtsfreightliner.com


They kindly gave me some part numbers.
These engines are lasting up to a million miles so used
parts are in short supply. If you are lucky you
might be able to find one out of a truck wreck if the engine itself
was damaged. If the engine was OK I am sure somebody would pay big bucks
for it. Word is out. These engines are in high demand.

We just need the waste power turbine and gear box.
Any Mazda 20B turbo charger will work. Maybe even the stock sequential
turbo version which I have in the hangar will work.

All we need do is demonstrate a 5% or 10% improvement in BSFC
and the world will beat a path to the Wankel rotary door.

I'll kidnap the Mazda engineers here in SoCal and force them
to look :)

30% better BSFC is theoretically possible due to the lack of exhaust valves
in the rotary and that would be a revolution in internal combustion engines.

The 650 HP DD16 is even more sophisticated with a variable ratio gear box.

If Detroit Diesel built a sleeve valve DD15 they would get
another free 50 HP bumping the power up to 500 HP from the non
TC 400 DD13 horsepower.


Paul Lamar

===========================================
This quote just arrived. This is very very cheap compared to what
it would cost if we had to do it from scratch. I hope the
Mazda engineers are paying attention.

Thanks Knute. Quick work.

This thing would easily replace a 600 HP turbo prop and have half
the fuel burn.

Paul Lamar
-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2013 All world wide rights reserved.