-------- Original Message --------
Subject: Another paper on turbo compound.
Date: Tue, 21 Jan 2003 06:26:28 -0800
From: ACRE NL
<rotaryeng@earthlink.net>
>> > Sometimes old ideas that have fallen out of favor become viable again
>> > when the economic environment changes or there are some developments
>> > in technology that change the balance back in their favor.
>> > I think turbo compounding's time has come again.
>> > Paul Lamar
>> >
>> >> Probably the most practical way to look at turbo compounding in auto
>> >> applications would be in a hybred vehicle. The turbine could drive a
>> >> homopolar alternater at direct drive speeds to charge the electric
>> >> assist modes. This would uncouple the turbo rpm from drive shaft
>> >> rpm and avoid the complexity and losses of clutches and gears.
>> >> On an aircraft the weight and complexity of a hybred would be
>> >> excessive, but you could offload all accessories to the
>> >> electric system. - Vance J
>> >>
>> > Yes I was thinking that use in a hybrid would be rather a good
>> > application. A small turbo compound all aluminum wankel engine
>> > would save a bunch of size & weight over a small piston engine.
>> > All you would need is a small alternator that would work at
>> > 100,000 RPM. Probably not that hard to do. As an intermediate
>> > step one stage of gear reduction would probably work with
>> > an off the shelf alternator.
>> > Paul Lamar
>> >
> "Michael D. Lilja" wrote:
>
>> I have been told by a couple of people as well as reading, one of the reasons the P-51 was so
>> fast
>> and efficient (relatively) was that the thrust developed by the cooling system ducting was
>> used to
>> offset the cooling system drag. What if you used the energy of the exhaust to run a turbine
>> wheel
>> in the manner of a jet engine and used the power generated to run a fan (in the manner of a
>> turbo
>> fan engine.) That would maybe not only create a higher density atmosphere for combustion
>> (bleed
>> air form of turbo charging.) Blow the rest of this air over all the radiators (oil and
>> coolant)
>> and collect their heat energy. Then in a concentric tube with the exhaust, duct it out the
>> back
>> directly as thrust and skip the mechanical connection to the engine all together? Might be
>> simpler and easier. One of the draw backs I can think of would be fitting it in some where.
>> Just
>> remember, if you think it has some merit, you heard it here fi
>> rst! :-) Thanks for the wonderful
>> discussions and forum. I am also glad to see someone else as interested in turbo compounding
>> as
>> me. Maybe these two attachments will give you some ideas as well. The pictures are courtesy
>> of
>> Torque Meter
>> Mike Lilja
>>
> Mike I took the liberty of substituting a better picture of the Napier Nomad
> I had on file than the one you uploaded. Here is your drawing and
> the Nomad picture in question. Too bad the Napier Nomad never went into
> production. It was an outstanding turbo compound design.
> Paul Lamar
"Michael D. Lilja" wrote:
Thanks for the great picture, Paul! I agree it is a shame the engine did not go into production.
But, it was a quite complex and expensive engine. If we are serious about turbo compunding,
then, I believe, simplicity is the answer. Hope this helps with the creative juices.
Mike Lilja
I am all for simplicity. Apparently the automotive industry has been
forced into complexity by political forces. Who would have thunk 30 years
ago that almost all engines would be four valves per cylinder with dual
overhead cams. The electronic engine controls would have happened regardless
as they are rather cheap IMHO. Now we have had electric cars that have
come and gone in the short space of five years as I predicted they would.
Currently very expensive and complicated hybrid cars are being tried
and if they are forced on us by tax breaks or other political means
they might survive. IMHO if you take a current tiny (almost all are TINY)
hybrid car and strip out all the heavy and costly electrical stuff
and replace it with a small recip the performance would be better,
the interior volume for passengers and luggage would be superior and
the mileage and emission would be 90% to just as good.
This is the insane environment we now find ourselves where cost and
complexity appear to be less important than political considerations.
I think it is a perfect time to bring back the turbo compound as it
is much less costly and way more simple than a hybrid car. Some sort of
variable turbine gear box might be necessary to derive the full fuel
consumption and emissions benefits but that can be cheaply controlled
with electronics. We discussed all this at length several years ago
and here are some sketches.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.