Subject: can a Lycoming 540 engine be used in, the pusher con configuration
From: rotaryeng
Date: 1/7/2013, 10:07 PM
To: AAAA-rotaryeng



Paul, a quick question, can a Lycoming 540 engine be used in
   the pusher con configuration? Are the thrust rings on the
  crankshaft the same thickness?

  Milo

Yes they can be used but you need to provide a needle thrust bearings
behind the planet carrier. See the attached 3D.

Needle bearings hate big diameters and high RPM so use at least
two back to back or three to cut the RPM and on any one of them.

The thrust rings on the  crankshaft are irrelevant.

Paul Lamar



Lycosaur should be direct drive. Just needs different prop.

Dale Davies


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2013 All world wide rights reserved.