Paul, a quick question, can a Lycoming 540 engine be used in
the pusher con configuration? Are the thrust rings on the
crankshaft the same thickness?
Milo
Yes they can be used but you need to provide a needle thrust bearings
behind the planet carrier. See the attached 3D.
Needle bearings hate big diameters and high RPM so use at least
two back to back or three to cut the RPM and on any one of them.
The thrust rings on the crankshaft are irrelevant.
Paul Lamar
Lycosaur should be direct drive. Just needs different prop.
Dale Davies
Here is a link to a certificated twin pusher with IO 540s. They are direct
drive with a modified twist in the propeller for the airflow coming out of
the cowl. This is a very noisy configuration - different than the Piaggio
Avanti or Beech Starship since it has piston engines. Any ice shed from the
leading edges of the wing or cowl goes through the prop and gets slammed
into the side of the fuselage. The Angel needed an extra shield on the side
of the fuselage in the plane of rotation. Any bolt, nut, or piece of exhaust
system or that gets kicked up by the mains goes through the arcs and hits
the leading edge of the prop. High maintenance on the prop. Other than
that it is a very powerful short field aircraft worthy of consideration for
bush operators. The specs speak for themselves:
http://www.angelaircraft.com/
Norm
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2013 All world wide rights reserved.