Subject: can a Lycoming 540 engine be used in, the pusher con configuration
From: rotaryeng
Date: 1/9/2013, 8:50 AM
To: AAAA-rotaryeng


 Paul, a quick question, can a Lycoming 540 engine be used in
the pusher con configuration? Are the thrust rings on the
   crankshaft the same thickness?
Milo


 Yes they can be used but you need to provide a needle thrust bearings
 behind the planet carrier. See the attached 3D.
  Needle bearings hate big diameters and high RPM so use at least
 two back to back or three to cut the RPM and on any one of them.
  The thrust rings on the  crankshaft are irrelevant.
  Paul Lamar


 Paul,
 Have located an I0 540 crankshaft. Will ship directly to you for measurements for sand casting drawing. When we pour if anyone else would like a casting let me know, 6061-T6. Thanks, Milo



OK

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2013 All world wide rights reserved.