Hi Paul, just going through the website for some info i needed, i saw
 some of the links were dead under "interesting
 rotary engine and other web site links" Specifically from the
 top of that subheading, links 2,3 and 5,

 Alex


 Thanks Alex. Fixed.


 Another fact finding visit with IMS  yesterday. All tubes have to be one
 inch. Not just D and H. It will add a bit of weight but not much.
 It will be a lot stronger.

 IMS can read my iges files but Rhino 3 is having trouble with tubes.
 I am ordering an up grade to Rhino 4.

 The Rhino 4 should be here in a couple of days.
 I showed IMS the steel straps and they had no problem with that.

 As soon as I get Rhino 4 and get the tubes in separate iges files
 I will get a formal quote.

 Anybody with solid works out there that can fix a tube
 problem?

 I send an surface iges.

 You load it in SW.

 You save as iges solid.

 Here is an example iges.

 Paul Lamar

Your IGES file has problems coming into SW.  The cut faces are missing.
Is this the problems to which you are referring?  It is easy to fix.  Are
you trying to get files for laser cutting?

I would be glad to look and any or all parts of the mount.

Gary

Thanks Gary.

Yes that is the problem. Rhino can sometimes loft these and sometimes
it can not. Bug. This one is partially lofted ends. Still not a perfect
solid.

Yes files for laser cutting.

Can I send you about 8 for fixing.

Paul Lamar

 The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/amz8apm
 Copyright 1998-2013 All world wide rights reserved.