Hi Paul, just going through the website for some info i needed, i saw
some of the links were dead under "interesting
rotary engine and other web site links" Specifically from the
top of that subheading, links 2,3 and 5,

Alex


Thanks Alex. Fixed.


Another fact finding visit with IMS yesterday. All tubes have to be one
inch. Not just D and H. It will add a bit of weight but not much.
It will be a lot stronger.

IMS can read my iges files but Rhino 3 is having trouble with tubes.
I am ordering an up grade to Rhino 4.

The Rhino 4 should be here in a couple of days.
I showed IMS the steel straps and they had no problem with that.

As soon as I get Rhino 4 and get the tubes in separate iges files
I will get a formal quote.

Anybody with solid works out there that can fix a tube
problem?

I send an surface iges.

You load it in SW.

You save as iges solid.

Here is an example iges.

Paul Lamar



Send it over Paul, I'll see what I can do

Jarrett

The work around is working pretty good. I got it half done.
Strange about that Isocurve Density bug.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2013 All world wide rights reserved.