best regards

Alex

On Tue, Jan 15, 2013 at 11:54 AM, rotaryeng <rotaryeng@earthlink.net <mailto:rotaryeng@earthlink.net>> wrote:

   5 inches deep
   12 inches long
   9.5 inches wide

   About 2.4 gallons 564 cubic inches

   The Mazda oil pan hole pattern varies so don't take
   these hole dimensions as the gospel truth.

   Use  Lexan sheet and a hole punch on your stock steel pan.


   Paul Lamar

Thanks for the oil pan photos and dims Paul, will get on to having one made
up when i get back, 9.6 quarts will be a good improvement on capacity and
also buy some extra time on climbing temps while i tweak the oil cooler
diffuser on the first few flights.

alex molteno

Handy in case of leaks too :)

That should have been transfer punch rather than hole punch.

Paul Lamar

   The Rotary Engine News Letter. Powered by Linux.
   ACRE NL web site. http://www.rotaryeng.net
   You Tube http://tinyurl.com/amz8apm
   Copyright 1998-2013 All world wide rights reserved.