Subject: 3.17 drive bell housing
From: rotaryeng
Date: 1/16/2013, 3:38 PM
To: AAAA-rotaryeng




Does anyone have a RX8 Rotary engine bell housing they are not using, and would
  like to part with?

If so please let me know. milo

Milo,
I hope you can adapt your unit to the 13B REW (92-99) REW AT housings as well?
Marc


The auto tranny is the one to get. Both will work.

Paul Lamar

Do all the auto trannies have the starter in the lower aft position, that
  desired for our plan?
milo


No 3rd gen cars 1993 to 2004  auto tranny have the starter on the side of the engine
from the driver view I think. The RX8 manual is back down in the old position.
That is most common in the U.S..

It is the one to go for but it is not the prettiest.


http://www.gardnerautoparts.__com/mazda-used-auto-parts/ <http://www.gardnerautoparts.com/mazda-used-auto-parts/>



Paul Lamar

------------------------------__----------------

With a minor mod to the casting pattern all bell housings
can be accommodated with different adaptors.



Paul Lamar


Paul,  I sort of remember hearing somewhere that some of the piston engined
Mazdas have the same bellhousing bolt pattern and alignment dowels.  I think
it was on a site about the Mazda Miata concerning putting a rotary into a
Miata,There were also other Mazdas that use the same transmission.  If true
it would possibly increase the number of possible starter locations and
widen the search for used parts.

George Grimes

I would not be a bit surprised. IMHO Mazda does not build all their transmission.
They buy some of them them. The auto's probably come from Jatco.

http://en.wikipedia.org/wiki/List_of_Jatco_transmissions

http://www.aisin-ai.co.jp/english/company/outline.html

http://www.manualtransmissionpart.com/MAZDA-catalog.html


Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2013 All world wide rights reserved.