Subject: Fwd: RE: 3.17 drive bell housing
From: rotaryeng
Date: 1/16/2013, 9:23 PM
To: AAAA-rotaryeng



Does anyone have a RX8 Rotary engine bell housing they are not using, and would
 like to part with?

If so please let me know. milo

Milo,
I hope you can adapt your unit to the 13B REW (92-99) REW AT housings as well?
Marc


The auto tranny is the one to get. Both will work.

Paul Lamar

Do all the auto trannies have the starter in the lower aft position, that
 desired for our plan?
milo


No 3rd gen cars 1993 to 2004  auto tranny have the starter on the side
of the engine from the driver view I think. The RX8 manual is back down
in the old position. That is most common in the U.S..

It is the one to go for but it is not the prettiest.


http://www.gardnerautoparts.com/mazda-used-auto-parts/



Paul Lamar

Paul,
The starter you have labeled as a "20B/Cosmo" is also identical to the
1992-2000 13Brew TT automatic versions of the 3rd gen rx7.......as is
the bellhousing.........

Marc Wiese

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2013 All world wide rights reserved.