Subject: Mazda rotary upgrade year old news
From: rotaryeng
Date: 1/16/2013, 9:21 PM
To: AAAA-rotaryeng


 Mazda Design Breakthrough May Give Rotary New Life

Roger Schreffler <http://wardsauto.com/author/roger-schreffler


WardsAuto
------------------------------------------------------------------------------------------------------------------------
Despite plans to stop production of the RX-8 sports coupe in June, and no
commitment from management to replace it with another Wankel-powered
car,Mazda <http://wardsauto.com/taxonomy/term/53620may be on the verge of a
major rotary breakthrough.

Mitsuo Hitomi, general manager-powertrain development, says the auto maker
soon will complete development of an all-new rotary engine that meets future
fuel-economy and emissions standards.

While Hitomi won’t confirm a completion date, his disclosure is evidence the
rotary is alive and well at Mazda and that a new car powered by the engine
could be on the way.“We think we’ve found a way to improve the rotary’s fuel
economy to be truly equal to that of conventional piston engines and, if so,
we believe we can reintroduce the rotary to the market,” he
tells/WardsAuto/in an interview.

Hitomi declines to pinpoint when that might happen, but suggests the
timeframe roughly would be equivalent to any other engine plugged into one
of Mazda’s vehicle programs.  Best guess is two years, once the application
has been determined.

Fuel economy and emissions were improved in the developmental engine “first,
by changing the shape of the troichoid housing,” the Mazda executive
says.“The rotary has many seals, and ‘sealability,’ particularly at the
apex, or tip, of the rotor has been a longstanding problem” dating back to
the mid-1960s and the Cosmo Sport, Mazda’s first rotary car.“Even with our
current 1.3L Renesisrotary, gaps can develop between the apex seal and
troichoid housing in light-load operation when imbalances in centrifugal
force and gas pressure occur,” he says.

Specifically, centrifugal force pushes the seal against the housing surface.
In low engine-rpm ranges, or under low-load conditions, gas pressure in the
combustion chamber can cause the seal to lift off the surface, resulting in
combustion gas leaking into the next chamber.By changing the shape of the
troichoid housing, the seals remain flush to the housing, Hitomi says.  “In
addition to reducing emissions, better sealing improves fuel economy and
overall performance.”

A second engineering enhancement focuses on ignition.“I can’t specify how we
plan to address this problem,” the Mazda engineer says, “but the rotary’s
spark plug is in a recessed position (below the housing surface), compared
to that of a piston engine.“This causes ignitability problems and increases
fuel consumption.  We’ve found a way to make dramatic improvements,” he
says.In June,/AutoCar/reported Mazda would introduce a laser-injection
system to replace conventional sparkplugs.

Hitomi counters popular perception that a rotary engine’s fuel economy is
inherently poor.“In the past, Mazda engineers made a conscious decision to
focus on the rotary’s weaker points – low torque, for instance,” he says.
“This led to adopting a complicated and large variable-intake system, as an
example.

“Moving forward, we plan to put greater emphasis on the rotary’s strong
points – low vibration, compact size and high power output.  And in this
way, we can improve fuel economy.”

One result of that: Mazda will simplify the intake system, which in turn
will reduce engine size.

Hitomi believes the new engine eventually will be adopted for extended-range
electric vehicles like the Chevrolet Volt.  He doesn’t say so, but that
could mean a future RX-8, RX-9 or even an RX-7 EREV.

Mazda isn’t alone in looking at EREV applications for rotary engines, which
are drawing interest from others, including engineering experts AVL, for
their compact size and light weight.

The new Mazda engine will not necessarily be the 16-X prototype displayed at
the 2007 Tokyo Motor Show, which reportedly was targeted at 1.6L in
displacement and would generate 350 hp.

Mazda’s Skyactiv fuel-efficiency technology could be applied to the new
rotary, as well.“I think that whatever engine we introduce – conventional
gasoline and diesel or rotary – the technology is applicable,” Hitomi says.

At a press briefing in December, Hirotaka Kanazawa, senior managing
executive officer in charge of Mazda’s technical operations, openly
discussed three Skyactiv engine series: the gasoline Skyactiv-G now on the
market, diesel Skyactiv-D, and rotary Skyactiv-R.

Since 1967, when Mazda introduced Cosmo Sport, the automaker has sold nearly
2 million rotary vehicles.  In the engine’s 1970s heyday, four out of five
Mazdas sold in the U.S.  had rotaries.


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2013 All world wide rights reserved.