Paul:
I have a little used RX-8 high-power engine I'd like to convert to PP INTAKE to
use on my COZY IV. I do have Tracy's
2.85-1 reduction drive.
Is it worth it-------------should I start with an RX-7 engine to get PP exhaust
and then convert to PP intake?
I presume no issues if I want lightweight end housings.
Thanks and regards,
cozyflyr
Stick with the RX8 p-port. The best of both worlds.
due to the side exhaust on the RX8 it idles as well as stock
13B. Don't waste your time with a side port engine.
Sure an heck don't pay somebody big bucks to "port"
a side port engine. That is a gross waste of money.
Paul Lamar
Thanks Paul:
So I understand it is OK to tear down my RX-8 and send the housings down to Jeff Dodridge for the P-port intake bore job
and welding of 2" dia. tube?
Then for a lightweight engine I could buy the aluminum end and center housings?
Regards,
cozyflyr
I am not sure jeff does welding but he could send them to
mazdatrix for tig welding and finish grinding. They have done
several.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.http://www.rotaryeng.net
You Tubehttp://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.