Subject: Daytona 24 hour on the Speed Channel now
From: AAA-rotaryeng
Date: 1/27/2013, 10:06 AM
To: AAA-rotaryeng


Mazda has gone from a world class racing organization to
running a Mazda 6 in a 3rd class no car enthusiast cares about.
Back of the pack. The fast prototype drivers say they are too slow
and as such are a hazard.

IMHO they are wasting money they could have put in a
turbo compound rotary powered  RX8 that would run up front in
the GT class and beat the pistons on fuel mileage.

Apparently Mazda management has been taken over by politically correct
water melons :)

--------------------------------------------

We do have one 3 rotor  RX8 in the GT class that will probably finish
fairly well as many of the cars ahead of it now will drop out.

http://www.racersedgemotorsports.com/

-----------------------------------------------------

That's out. The car crashed. Apparently it was a rent-a-race-car
and the guy they rented it to crashed it :).

All three dies-cast aluminum block Mazda SkyActive  turbo diesels
are now out apparently with serious engine problems.

IMHO die-cast aluminum is not the right material
 for a turbo diesel racing engine.

Mazda management was fooled by the fact that the rotary is so robust.

They think they can do the same thing with a piston engine.
It is just a lucky set of circumstances that the rotary
turned out to be so robust.

From Kenichi Yamamoto in his book "Rotary Engine" 1981
with a comment from me.

http://www.rotaryeng.net/What-is-a-rotary-engine4.html

(1) Every moving part, including the timing mechanism, should
make a rotating motion. A mechanism having a reciprocating
inertia will increase mechanical noise and vibration, and will
work against high speed and high revolution.  [In addition
mechanisms that reciprocate generate reversing loads. Reversing
loads lead to reversing stresses. Reversing stresses lead to
metal fatigue and limited life. The Wankel rotary engine has no
reversing stresses therefor the life of the major parts such as the
eccentric shaft and rotor are unlimited unlike, crankshafts, connecting
rods, pistons and poppet valves. Paul Lamar]

Not to mention piston engine blocks :)

Paul Lamar


-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.