What the heck is Bit-Banding? I am no expert in this subject but I will
do my best to explain it here as I understand it now. Bit-Banding is a
feature of the ARM processor.
This bit-banding operation greatly simplifies bit manipulations. Instead
of reading a byte, AND?ing in the appropriate bit, and then writing the
byte back out, as done in the old 8 bit embedded processors,
bit-banding accomplishes this with a single store instruction.
Example of Bit-Banding
Bit-banding uses address space that aliases peripheral or static ram
address space, allowing a single bit within a byte to be manipulated by
a reference to a byte at an aliased address.
In computing, aliasing describes a situation in which a data location in
memory can be accessed through different symbolic names in the program.
In other words the programmer assigns a name to a memory location. Lets
say we want to turn a light on in the instrument panel when the oil
pressure drops to a dangerous level. The programmer would call it the
"oil-pressure-light". It only needs one on or off bit (wire) to do this
just like the light switch in your house.
For example, a write to address 0x20000000 modifies the static ram
32-bit word at that location, but writing to 0x28000000 modifies only
bit 0 at address 0x20000000.
Static random-access memory (SRAM) is a type of semiconductor memory
that uses bistable latching circuitry to store each bit. The term static
differentiates it from cheaper dynamic RAM (DRAM) which must be
periodically refreshed. Static RAM is widely used in embedded processors
as unlike PC's it takes no valuable programming time to refresh. Time is
of the essence when you are controlling machines.
With the prior method of bit manipulations with sequential instructions
doing the read-modify-write operations, a hardware interrupt could occur
which, potentially, could change a bit at that memory location.
After the interrupt returns, the store could be writing corrupt data
back to that memory location.
Paul Lamar