Subject: Put this in the EFI email folder RPM Bit Banding
From: AAA-rotaryeng
Date: 2/2/2013, 8:05 AM
To: AAA-rotaryeng


What the heck is Bit-Banding? I am no expert in this subject but I
will do my best to explain it here as I understand it now. Bit-Banding
is a feature of the ARM processor.

This bit-banding operation greatly simplifies bit manipulations.
Instead of reading a byte, AND?ing in the appropriate bit, and then
writing the byte back out, as done in the old 8 bit embedded
processors, bit-banding accomplishes this with a single store
instruction.

Example of Bit-Banding

Bit-banding uses address space that aliases peripheral or static ram
address space, allowing a single bit within a byte to be manipulated
by a reference to a byte at an aliased address.

In computing, aliasing describes a situation in which a data location
in memory can be accessed through different symbolic names in the
program. In other words the programmer assigns a name to a memory
location. Lets say we want to turn a light on in the instrument panel
when the oil pressure drops to a dangerous level. The programmer would
call it the "oil-pressure-light". It only needs one on or off bit
(wire) to do this just like the light switch in your house.

For example, a write to address 0x20000000 modifies the static ram
32-bit word at that location, but writing to 0x28000000 modifies only
bit 0 at address 0x20000000.

Static random-access memory (SRAM) is a type of semiconductor memory
that uses bistable latching circuitry to store each bit. The term
static differentiates it from cheaper dynamic RAM (DRAM) which must be
periodically refreshed. Static RAM is widely used in embedded
processors as unlike PC's it takes no valuable programming time to
refresh. Time is of the essence when you are controlling machines.

With the prior method of bit manipulations with sequential
instructions doing the read-modify-write operations, a hardware
interrupt could occur which, potentially, could change a bit at that
memory location.
After the interrupt returns, the store could be writing corrupt data
back to that memory location.


Paul Lamar



Paul,

Cortex M-3 and Cortex M-4 do support bit banding,  but look closely at
the compiled code as often you might find it did a byte manipulation.

Hint when you have a tech support question, put the question as simple
as possible, so you get a straight forward response:

Two Examples:
I have a problem at reset, my board acts strange.  vs.
What is that status of GPIO4-7 when RESET_N is asserted?

Not that it isn't a valid question, but when you get 30 of those a day,
what would you respond to immediately, vs put at the bottom of the queue?

Tom W

-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.