Subject: Tango nose gear parts dimensions
From: AAA-rotaryeng
Date: 2/5/2013, 10:59 AM
To: AAA-rotaryeng

Alex, what stock Tango nose gear parts are we going to use.

I need some dimension.

1.The distance from the prop center line down to the ground.

2. The diameter of the nose gear tire.

3. The dimensions on the tailing link.

It is best if the tire contact patch is right under the shock lower eye.

We won't be able to use a die spring so we will have to cast RTV around
the lower shock shaft. More on that trick later. I need to see if
the lower eye can be unscrewed from the shock shaft.
If it can we can use a die spring.

We won't be able to use a common fitting for upper motor mount tube and shock bracket.
Two fittings will be required.

You can mark up this JPG using MS paint and send it back

Paul Lamar
-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.