Subject: Can we improve the aircraft flow-lines with rotary engines
From: AAA-rotaryeng
Date: 2/6/2013, 7:48 PM
To: AAA-rotaryeng



I don't think there is anybody that far south.
This is Neal Unger in Parkes.

How's it going Neal?

Paul Lamar

The picture of Pete's aircraft is the opportunity for me to make a loud
question:
- how can we avoid to have this big and ugly airscoop in front of the
aircraft ?

The rotary has the advantage against the Lyc and Conti engines of being
almost cylindrical.
Furthermore, its low weight and PSRU mandates an extended nose
Therefore, we could dream of a sleek nose with super aerodynamic flow-line,
similar to a P51 mustang.

Is there anyway to achieve that and organize cooling scoops and flox such
that they do not overgrow the nose of the aircraft ?
Philippe CHENEVIER

I think you mean Neal's airplane. The scoop is large to deal with the
out back desert temperatures and full power take off's at high climb angles.
Bush planes in other words.

Back in WW II it was always easier to cool fighter planes in Europe as
opposed to North Africa.

Sleek pointy noses are not all that much better. The tear drop shape is
optimum. Pointy noses are frequently confused
with low frontal area. Apples and oragnes.

There might be a very slight advantage in increased thrust.

Paul Lamar


Paul,
          There must be a better word for frustration.   Still to leave
the ground.  5 months ago had a test flight lined up  and the slide throttle
would not move with the engine running due to suction pressure.  I had done
all my testing with the vernier throttle and winding the throttle open and
shut with my thumb turning the knob.  However with a sudden thrust as in a
panic "go around" nothing happened.  So the test pilot simply left telling
me to "fix it"!  So I rang Darren from billet inc in Brisbane who assured me
that he could fix it easily.  4.5 months later I had a mate actually go and
collect it from him to find he had not touched it even though he had taken
full payment 3 months earlier telling me that it was finished!    3 weeks
ago it was sent to Rohan Ambrose of Xtreme rotaries in Melbourne to do the
job.  Now the good news is that Rohan is actually still in business contrary
to advice put out 6 months ago.  That is brilliant news for Australia, as
Rohan can do anything with rotaries including all alloy jobs, but he now has
taken his first flying lesson and is looking at getting a plane!!  Now he
has a real interest in rotaries for planes.
  So I still await my bird actually flying.  Once the throttle body
returns I will then have to retune the motor and finally get off the ground.
Frustrated, but now hopeful.    Neil.

Was it one of my slide throttles? Did it have Teflon in it? Very
important. Teflon is the only material with coef of friction low enough to
work.

With two... two inch diameter holes the port area is 6.25 square inches.

The pressure in the intake manifold can be up to 15 psi. That is
a clamping force on the slide of 94 pounds!!!!. That will not MOVE !!!!!
The right kind of Teflon has a friction coef of only 0.06.
That reduces the worst case force to a manageable .06 X 90 or 5.6 pounds.

All slide carbs use Teflon.

We went over this many times in the past 5 or 10 years :)

A lot a mechanics do not understand this and say "sure I can build a slide
throttle" :)

Here is how to cut the Teflon and install it thanks to Criag Smith.

Get it back and ship it to me. If I can I will install the teflon and test
it... no charge except.... for shipping.

Paul Lamar



Paul,
          yes it was one of your slide throttles with the teflon included,
but still would not budge.  Thanks for the offer to fix it, but freight to
the USA is prohibitive and time consuming.  That is the reason why I sent
it to get it fixed here as it was initially promised to be back within 2
weeks and freight was $15.00.  Rohan is now ready to return it to me, so
this time all should be well.  Thanks for your kind offer. It is people like
you who restore my faith in others, after having been thoroughly mauled by
the gent in Brisbane.  I asked for my money to be returned twice, but no
movement whatever, so now have to go through the bankcard system to retrieve
it. I am informed it may be up to 90 days!

Neil.

Was it solid Teflon?  Early solid Teflon versions had a tolerances problem on
the thickness of the Teflon. If it was I will send you another later version with an aluminum slide no charge. Should get there a lot sooner.

The heat expansion of Teflon is 7.5 x 10-5 in./in./°F = 0.00075

While that of Aluminum is 12.3 X10-6 in/in oF  = 0.0000123

That means the Teflon expands more than the aluminum housing
but not by much in therms of a thickness increase.

That could be the problem with the 3/8th" thick solid Teflon models.

It is hard to hold the Teflon down so a .010 milling machine cut can
be taken on the thickness.  However .010" should be enough on a 3/8"
thick slide.


Only a few of those were made and sold. Most are the later aluminum slides versions.

What is your address again Neal. I will cut the Teflon sheet and
assemble the slide, test it and send it to you no charge.

I would like the old one back to try and figure out what went wrong.

Paul Lamar

 --
 The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2013 All world wide rights reserved.