Subject: Dissolving Castor Oil gum/varnish/carbon
From: AAA-rotaryeng
Date: 2/6/2013, 10:21 PM
To: AAA-rotaryeng


I was using Blendzall's Racing Castor premix in my rotary, guess it was a bad idea, it seems ALL the apex seals are
stuck solid due to gum/varnish build-up!! NO! HELP! Anyone know of anything I might be able to squirt inside it to
dissolve that gunk and save me from a pull & rebuild?! THX!

Dan Gorsline

Try ATF for a few days.


If it is a 13B.
Then use a 1/4 inch dowel to work the seals in and out in their slots  through the exhaust ports.

If it is an RX8 you are stuck :)

Once it is running again pour some water in the intake to blow out the carbon.
Not enough to kill it. Keep it running while doing so.

Use only 2 cycle oil premix in the future.

Paul Lamar
-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.