Hi Bruce, I understand from Pete at Teamtango that you're interested in
 putting a rotary in your tango, if so I'll be happy to help anyway I can, and send photos as I get things done.

 I'm not sure if you are subscribed to it already but one of the best
 sources for information on the rotary is a website and newsletter moderated
 and owned by Paul Lamar as well as Tracy Crooks guide to installing the
 rotary. I don't have all the links handy but you can Google the following for more info

 Paul Lamar's website
 www.rotaryeng.net

 Paul Lamars rotary mailing list, rotaryeng@earthlink.net

 Real World Solutions
 Tracy Crook


 Alex

 It would be cheaper if we did 2 Tango motor mounts rather than one.
 Good thing I ordered 24 firewall fittings :)

 Paul Lamar


 Hi Alex

 have you had the motor mount fabricated yet?  I would be interested in getting one made up as well

 Bruce

 You got me just in time Bruce. I was about to get a quote on laser cutting the
 tubes.

 What part of Oz are you in? We have people on both coasts building or flying
 rotary powered air planes.

 Paul Lamar


I live on the east coast near the National Capitol (Canberra)

Bruce

I don't think there is anybody that far south.
This is Neal Unger in Parkes.

How's it going Neal?

Paul Lamar

 --
 The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2013 All world wide rights reserved.