Subject: Dissolving Castor Oil gum/varnish/carbon
From: AAA-rotaryeng
Date: 2/9/2013, 3:40 PM
To: AAA-rotaryeng


   I was using Blendzall's Racing Castor premix in my rotary, guess it was a
 bad idea, it seems ALL the apex seals are
   stuck solid due to gum/varnish build-up!! NO! HELP! Anyone know of
 anything I might be able to squirt inside it to
   dissolve that gunk and save me from a pull & rebuild?! THX!

 Dan Gorsline

 Try ATF for a few days.


 If it is a 13B.
 Then use a 1/4 inch dowel to work the seals in and out in their slots
 through the exhaust ports.

 If it is an RX8 you are stuck :)

 Once it is running again pour some water in the intake to blow out the
 carbon.
 Not enough to kill it. Keep it running while doing so.

 Use only 2 cycle oil premix in the future.

 Paul Lamar
 --

 Dan, Being a model airplane addict that uses castor oil for lubricant, have
 seen this castor varnish many times in my older engines. The only thing I
 have ever found to clear this gunk out is more model airplane fuel. That
 would be methanol, nitro methane , and castor. 10% nitro should be
 sufficient. Fuel with synthetic oil will work better also to clean, and not
 rust everything together.

 Bob Mears

 Yes, Paul is correct (as always) I too know of the water trick to remove carbon build-up. Good to remove carbon build-up that causes pre-ignition in reciprocating engines. Give it a go, if it is running! shock cooling the carbon will dislodge it and spit it out the exhaust. What do you think about throttle body cleaner Paul, I think it could work too and support combustion?


I have no experience with that.

Paul Lamar

I was shown a similar trick to get sticky valves freed up and working again: set the engine to fast idle and slowly pour 1/2 a can of ATF through the carburetor - it made a huge cloud of white smoke, but it sure freed up the valves.

HLunt

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.