Paul, you might find this of interest.
Roger Paxton
http://www.avweb.com/eletter/archives/bizav/2435-full.html#208159
New Diesel Passes Vibration Tests
"A Wisconsin company said its new high-performance geared diesel aircraft engine reached a development milestone this
week when it passed vibration tests done by propeller manufacturer Hartzell. Induced vibration through a gear reduction
system eats props but Engineered Propulsion Systems (EPS) spokesman Steven Weinzierl said the integrated
counter-vibration systems in the engine work and the engine runs more smoothly than many gasoline engines. "It's a
distinct departure from prior engine designs, and we believe what Hartzell has now confirmed: induced vibration is no
longer an issue," Weinzierl said. Hartzell said Engineered Propulsion Systems' Vision 350 easily met is durability
standards when tested with traditional aluminum props, a carbon fiber model and its new five-bladed graphite/composite
propeller. "We were very encouraged to see that the stresses on the propellers were acceptable and lower than most
engines we have surveyed," said Hartzell spokesman Bruce Hanke. "We look forward to continuing to work with EPS on this
innovative new product." As we reported in 2010, EPS is developing the engine as a direct replacement for
high-horsepower gas engines that need leaded fuel to achieve full performance."
"The Vision 350 will put out 350 horsepower burning Jet A or kerosene and the fuel burn at 60 percent cruise is 12.3
gph. The engine is a "flat vee" configuration with 4.4 liter displacement and develops full power at 3,800 rpm, hence
the need for a gearbox. It's liquid cooled and its integrated preheating system burns fuel from the tanks to warm the
coolant in the water jackets for cold starts. Weinzierl said the engine is designed specifically for aviation use and
will find a market as a retrofit and new installation in high-performance piston aircraft. Cirrus has already expressed
interest in the engine. The company is also targeting the military drone market. It's now building pre-production test
articles but has not given a timeline on potential first deliveries."
It is probably a fluid coupling.
What does it weigh? They don't say do they? That is bound to be embarrassing :)
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.