Hello Paul,
Thank you for all of the information you have posted on your website. It has been very helpful. One quick question, in
your text about the teflon encapsulated o-rings for the rotor housings. You gave specific measurements for 2nd and 3rd
gen. rotary engines, is the same for the Rx8 engines? I assume they are, yet thought I would check with you. I have just
started to play with the Rx8 engine.

Thanks again for your investment of time into rotaries.
JEB Thornton
Olympia WA

It is very very important that you don't install over size O-rings so
please, double check the measurements. Use a vernier caliper to measure the
RX8 engine slot width and depth. Mazda has been known to change things from
time to time.

http://www.rotaryeng.net/O-ring-size2.html

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.