Subject: Composite aircraft firewalls
From: AAA-rotaryeng
Date: 2/21/2013, 12:03 PM
To: AAA-rotaryeng

All you guys building composite aircraft please scan the firewall building instructions and send them to me. I sold my KIS cruiser kit
and the buyer got the KIS Cruiser builders manual.

Alex, this picture is the shock mount for the KIS Cruiser bolted to the plywood sandwich KIS fire wall.

4 yards 50 inches wide from AC Spruce of carbon cloth 2 layers on each side would cost $120. Much cheaper than just one laser cut steel tube :)

The hot tip is high compressive strength end grain balsa for core.

"End Grain Balsa structural core material provides exceptionally high shear, tensile and compressive strengths, and stiffness for its weight. Available as flat panels, as scored scrim backed drapable sheets and as composite panels with a choice of skin configurations. Contact us for information, specifications and pricing on products not listed below."
    
http://www.fiberglasssupply.com/Product_Catalog/Core_Materials/core_materials.html

1/2 inch 24 by 48 is $33.

If you want something really bullet proof get the 3/4 inch  for $35 :)
The strength goes up with the cube or the 4th power of the thickness.
It is kind of dumb to design a composite airplane with out a sandwich firewall.

Paul Lamar

-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.