Hi Paul, here are 2 pics of the top of the motor, and 1 pic to compare the size of the rotary vs the soob, sorry it took
time i just moved into a new hangar,

Alex

Take another photo of this area perpendicular to the machined surface.

As far as I can tell you have a unique RX8 end housing. It looks like
a 13B end housing but it appears to have a missing taped hole.

The idea here is to use a 13B top mount bracket which I am building
several of. We may have to find enough meat in the end housing to drill
and tap the missing hole.
Paul Lamar


Alex, Paul

This is what ours looks like (excuse the dust etc)

Steve Izett


Good idea Steve. Well done.

Paul Lamar

Here is what our 13B version will look like.

Paul Lamar

 Here are some pics of the rear(car) end housing where the top motor mount goes.

If you need a motor mount take a picture of your engine in this area and I will figure out what type of top mount will work best.

 The picture tittle identifies the Mazda model.


Paul Lamar