Subject: Dissolving Castor Oil gum/varnish/carbon
From: AAA-rotaryeng
Date: 2/23/2013, 6:03 PM
To: AAA-rotaryeng


The following 2 pics are the product I was using...(1oz per 1gal) It's a bummer cuz I liked the smell :-/

Seems I have a new problem; I'm guessing the oil control seals are gone, because I'm apparently burning through 3qts of oil in a few days!! :-(
-Large puffs/bursts/clouds of smoke when I hit the buzZer...

-Dan G

Early O-rings were neoprene rubber and it went away first time the engine was over heated.

See http://www.rotaryeng.net/O-ring-size2.html

Paul Lamar

-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.