Subject: Dissolving Castor Oil gum/varnish/carbon
From: AAA-rotaryeng
Date: 2/26/2013, 11:27 AM
To: AAA-rotaryeng


 The following 2 pics are the product I was using...(1oz per 1gal) It's a
 bummer cuz I liked the smell :-/

 Seems I have a new problem; I'm guessing the oil control seals are gone,
 because I'm apparently burning through 3qts of oil in a few days!! :-(
 -Large puffs/bursts/clouds of smoke when I hit the buzZer...

 -Dan G

 Early O-rings were neoprene rubber and it went away first time the
 engine was over heated.

 See http://www.rotaryeng.net/O-ring-size2.html

 Paul Lamar


     What would cause this new, fairly massive consumption of oil? Its not
leaking out anywhere else anymore than usual, and its not contaminated
w/coolant...
-Dan G.

P.S. -You're probably already familiar w/this bit of rotary history but
I thought I'd
share..http://www.boatracingfacts.com/forums/showthread.php?8780-OMC%92s-4-Rotor-Wankel-Racing-Engine-The-Real-Story
Long Live the Rotary!


Could this have been the result of some substance poured into the
combustion chamber in an attempt to free the gummed-up apex seals?

Mark Steitle

Good point Mark. I am sure there are some chemicals that will destroy neoprene O rings.

Paul Lamar
-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.