Paul,
If you or Jeff still have any RX-8 coil
heat sinks on hand, I need one. Just
let me know how much and where
to send the money. Thanks.
Frank


I only made one Frank. Jeff never made any to my knowledge.
Alex Moltena owns it. The demand is not much so far.
Might take awhile for most people to realize it is the best way to go :)

If you know someone with a mill you can get the islands
machined and clamps made. If not my next door neighbor will do it
for $35 an hour. Drop ship the extrusion to me.

The minimum order for the extrusion is enough for two parts as I recall.

Paul Lamar

Would a spreadable thermally conductive compound be beneficial for this application?  The product in mind is used
between the CPU of a computer and it's heatsink.  If it is of benefit, would applying it to the stock mounting plate
provide meaningful results?

Product in mind:
http://goo.gl/Bx5Nr

Aaron Buster

That is a given but you still need the islands.
The thing to constantly keep in mind is four cycle piston engines
work the coil half as hard.

Paul Lamar

Found a great heat sink riding the back of the processor in an old HP computer.  Easy to get to, and free, or nearly so, when your PC dies.

Lewis.

How big is it. What are the dimensions.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.