Subject:
RX8 coils-mounted on $25 All Electronics heat sink
From:
rotary engine
Date:
3/10/2013, 11:13 PM
To:
AAA-rotaryeng
CC:
Jim Mederer <jimmederer@yahoo.com>, Tracy Crook <tcrook@rotaryaviation.com>, Tracy Crook gmail <rwstracy@gmail.com>
There is room for two sets on the heat sink.
It can be cut down to 3.5 inches by six inches.
Don't forget a 4 stroke piston engine coil fires half as fast
as a rotary engine coil or a two cycle engine coil. Therefor a four stroke coil can't be expected to live running at sustained high RPM
on a rotary or two cycle engine.
Paul Lamar
--
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.
Attachments-34/RX8-coils-mounted-all-elect-heat-sink.JPG
Attachments-34/Machined-heat-sink1.JPG
Attachments-34/P1060243.JPG
Attachments-34/heat-sink.jpg
Attachments-34/showing-signs-of-over-heating.JPG
Attachments-34/3-RX8-coil-tester.jpg