We will require a $100 deposit.

This is what it will look like.

All will be welded by an expert tig welder.
The guy is an artist.

Paul Lamar
--
How about a similar one for the 13Brewtt 93+ engine (and Cosmo)?
Marc


It will fit all two rotor engines. The hole pattern varies from year to year so you use your current stock steel oil pan to make a Lexan drilling template with a transfer punch. Then you drill the flange on the new oil pan. Careful ...its a little tricky...you have got to keep the top side up :)

The welding will be done by the same guy that welded this slide throttle part. I moved the drain to the bottom of the pan to get all the oil out. Works best with a tail dragger. You will need to drill and tap it for drain backs and oil drain.


Paul Lamar