We will require a $100 deposit.

This is what it will  look like.

All will be welded by an expert tig welder.
The guy is an  artist.

Paul Lamar
--
How about a similar one for the 13Brewtt  93+ engine (and Cosmo)?
Marc


It will fit all two rotor engines.  The hole pattern varies from year to
year so you use your current stock  steel oil pan to make a Lexan
drilling template with a transfer punch.  Then you drill the flange on
the new oil pan. Careful ...its a little  tricky...you have got to keep
the top side up :)

The welding will  be done by the same guy that welded this slide throttle
part. I moved the  drain to the bottom of the pan to get all the oil out.
Works best with a  tail dragger. You will need to drill and tap it for
drain backs and oil  drain.


Paul Lamar

Looks great, final cost and availability??

Rich

$350 plus shipping.
Send $100 cash deposit. No checks CC's or money orders.
Send it registered if your worried.
Or I'll accept Gold bullion coins :)
0.1 (1/10) ounce is worth about $160.

To: Paul Lamar
830 East Santa Maria St.
Suite #303 <<<<<<<<<<<<<<< very important.
Santa Paula Ca
93060

Paul Lamar