We will require a $100 deposit.

This is what it will look like.

All will be welded by an expert tig welder.
The guy is an artist.

Paul Lamar
--
How about a similar one for the 13Brewtt 93+ engine (and Cosmo)?
Marc


It will fit all two rotor engines. The hole pattern varies from year to year so you use your current stock steel oil pan to make a Lexan drilling template with a transfer punch. Then you drill the flange on the new oil pan. Careful ...its a little tricky...you have got to keep the top side up :)

The welding will be done by the same guy that welded this slide throttle part. I moved the drain to the bottom of the pan to get all the oil out.
Works best with a tail dragger. You will need to drill and tap it for drain backs and oil drain.


Paul Lamar

--
Then put me on the list Paul, with it welded up? Deposit to and how?
How about a model for the 20B?
Marc



$350 plus shipping.
Send $100 cash  deposit. No checks CC's or money orders.
Send it registered if your  worried.
Or I'll accept Gold bullion coins :)
0.1 (1/10) ounce is worth  about $160.

To: Paul Lamar
830 East Santa Maria St.
Suite #303  <<<<<<<<<<<<<<< very  important.
Santa Paula Ca
93060

Paul Lamar