Subject: RX8 coils-mounted on $25 All Electronics heat sink
From: rotary engine
Date: 3/20/2013, 9:30 AM
To: AAA-rotaryeng



There is room for two sets on the heat sink.

It can be cut down to 3.5 inches by six inches.

Don't forget a 4 stroke piston engine coil fires half as fast as a rotary engine coil or a two cycle engine coil. Therefor a four stroke coil can't be expected to live running at sustained high RPM on a rotary or two cycle engine.

Paul Lamar

Don'€™t most 4 stroke engines still fire the plug on the exhaust stroke also? That would make them the same wouldn'€™t it?

Bob Mears


I don't know what they do for sure. Most are computerized and it does not make sense to do that as the coils would suck down twice the current. Most EFI systems have a camshaft sensor.

Back in the old days the distributor ran off the cam shaft and  that was geared down 1 to 2 revs of the crank. They fired on the power stroke only.

Paul Lamar



I will look into that and let you know. Most of my later years turning a wrench I know they fired the plug on the exhaust stroke also to help burn any fuel that may still be in the chamber. All for emissions of course.

Bob Mears


-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.