Subject: AutoLine News - Mechanic Ernie Brink improves Wankel Engines
From: rotaryeng
Date: 3/23/2013, 10:34 AM
To: AAA-rotaryeng



Paul,

First time I have seen these ideas to improve the Wankel Engine, they
sound
logical.

http://www.youtube.com/watch?v=m3pCLjHZmhM

Anyone heard if they have been tested?

George F. Curtis Jr.

The guy is clueless. He has not read the available technical literature.
There is no pressure difference across the lower spark plug hole.

Paul Lamar

 I dare say that if his egt fell 600 degrees his power output decreased
 proportionally.

 roger paxton


Agreed - BS.  If anything the pressure would be higher in the adjacent
exhaust chamber which would cause exhaust to enter the intake chamber
as the apex crossed the spark plug hole, not the other way around.
And regarding his offset chamber geometry, he is making the mistaken
assumption that peak pressure is developed at TDC.  Obviously it it is
not and that is why ignition has to occur many degrees BTDC.  By the
time peak pressure is developed, the rotor face is past TDC and his
offset geometry is meaningless.  I have read SAE articles on Mazda
research on chamber geometry.  They already looked into this and it
did not help.

-- James O



--
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.