Hi!: I am interested in sending the first image, the graphic on the results
of a Renesis Rx-8 engine with a Peripeheral Intake Port to: aaroncake.net ,
where I opened a discussion on Reed-Valve Controlled Peripheral Ports.
The results shown here point to a higher maximal power output, but with
some losses in the low rpm end of the power curve, I guess this low speed
impairment may be corrected with a Reed-Valve that prevents any back-flow
of burned gas into the intake manifold, and also gives an always adequate
port closing timing, a Reed-Valve controlled port closes when the pressure
or filling of intake chamber has reached its best possible, but these
considerations
may apply only to car engines, not to airplane engines, where top power
is the
desired goal.
May I send this image to that site? or Do I have a permit to use this
data or are
copyrighted material?
Thank you for all your help, have a nice weekend and Easter Season, best
regards,
salut +
Jose Gros-Aymerich
Just attach it to a plain text messages. In fact alwyas send plain text
messages to the news letter
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.