We will require a $100 deposit.

This is what it will  look like.

All will be welded by an expert tig welder.
The guy is an  artist.

Paul Lamar
--
How about a similar one for the 13Brewtt  93+ engine (and Cosmo)?
Marc

It will fit all two rotor engines.  The hole pattern varies from year to
year so you use your current stock  steel oil pan to make a Lexan drilling
template with a transfer punch.  Then you drill the flange on the new oil
pan. Careful ...its a little  tricky...you have got to keep the top side up
:)

The welding will  be done by the same guy that welded this slide throttle
part. I moved the  drain to the bottom of the pan to get all the oil out.
Works best with a  tail dragger. You will need to drill and tap it for drain
backs and oil  drain.


Paul Lamar

Looks great, final cost and availability??

Rich

$350 plus shipping.
Send $100 cash deposit. No checks CC's or money orders.
Send it registered if your worried.
Or I'll accept Gold bullion coins :)
0.1 (1/10) ounce is worth about $160.

To: Paul Lamar
830 East Santa Maria St.
Suite #303 <<<<<<<<<<<<<<< very important.
Santa Paula Ca
93060

Paul Lamar


Paul:  Deposit on the way.

Kevin DeVore
Kerrville, TX 78028


Two more and we will have critical mass :)

Paul Lamar

--
Deposit is in the mail, Paul.
Marc W.

Alex, Molteno Tango sent your deposit.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.