Subject: Fuel burn per HP ratio
From: rotaryeng
Date: 5/1/2013, 11:39 PM
To: AAA-rotaryeng


 Can you give a me a fuel burn of say a 100 HP engine or a GPH per HP ???
 Ken



The number is based on pounds of fuel per hour.
The problem on GPH is  fuel expands and contracts rather strongly
with temperature.

Lets say fuel weighs 6.25 pounds per gallon.

The leaned rotary number is .47 pounds of fuel burned,
per HP generated, per hour.

So that is .47 divided by  6.25 or .0752 gallons per HP.

100 HP 7.52 gallons per hour.

Lycoming and Continental aircraft engines are about .5
some auto engines are claiming below .45
Carcinogenic Diesels are below .4 and half or well below half power.
Carcinogenic Diesels run super lean as the air throttle is always
wide open.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2013 All world wide rights reserved.