Subject: Cowling and loose parts
From: rotaryeng
Date: 5/2/2013, 9:47 PM
To: AAA-rotaryeng



What would happen if the p-port was moved away from the bolt hole a bit to
clear without interference. The power may be affected a bit but the idle may
be smoother by the fact of reduced overlap.



Dale Davies

Which bolt hole?

I don't really know. Not a lot of  data on this subject.

This is all I have on various p-port parameters.
I just copied the Le Mans engine because I figured Mazda knew what they
were doing ;)

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2013 All world wide rights reserved.