Can you give a me a fuel burn of say a 100 HP engine or a GPH per HP
??? Ken
The number is based on pounds of fuel per hour. The problem on GPH is
fuel expands and contracts rather strongly with temperature.
Lets say fuel weighs 6.25 pounds per gallon.
The leaned rotary number is .47 pounds of fuel burned, per HP
generated, per hour.
So that is .47 divided by 6.25 or .0752 gallons per HP.
100 HP 7.52 gallons per hour.
Lycoming and Continental aircraft engines are about .5 some auto
engines are claiming below .45 Carcinogenic Diesels are below .4 and
half or well below half power. Carcinogenic Diesels run super lean as
the air throttle is always wide open.
Paul Lamar
paul, do you have a chart showing pounds per hour fuel consumed
versus
horsepower.
thanks tom k
It is the 2nd chart I just up loaded for the P-port rotary.
A side port rotary would be slightly higher due to increased
pumping losses.
Does your email program automatically display attached jpg?
Here it is again.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.