Subject: Cowling and loose parts
From: rotaryeng
Date: 5/4/2013, 9:00 PM
To: AAA-rotaryeng


What would happen if the p-port was moved away from the bolt hole a
bit to clear without interference. The power may be affected a bit
but the idle may be smoother by the fact of reduced overlap.



Dale Davies

Which bolt hole?

I don't really know. Not a lot of data on this subject.

This is all I have on various p-port parameters. I just copied the Le
Mans engine because I figured Mazda knew what they were doing ;)

Paul Lamar


Hi!: the charts included are great, and I've been looking for that kind of info for months, after I was aware of the SAE papers that would follow the presentations by Dun-Zen Jeng, Ming-June Hsieh and others, in the 2012 Small EngineTechnology Conference and Exhibition, Technical session of Wednesday October 17, Engine Technology, part 5 of 5, (Session Code: SETC110) Room LP

* 2012-32-0064: 'The Intake and Exhaust Pipe Effect on a Rotary Engine Performance'; and by the same authors: * 2012-32-0057: 'The numerical Investigation on the Performance of Rotary Engine with Leakage, Different Fuels and Recess Sizes'. SAE indicates these papers are not available for bought, so if you know a way to buy both papers, or to obtain a copy, please let me know.
Thank you very much, nice week, salut +
   Jose Gros-Aymerich    E-28033 Madrid, Spain

The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.