Subject: Linux on netbook and windows 7/DOS-QB-EFI
From: rotaryeng
Date: 5/11/2013, 5:47 AM
To: AAA-rotaryeng


This is the oldest message I can find on DOS-QB-EFI

Since that time I have looked at almost every single chip computer
for an EFI system. I keep coming back to this solution.

What stopped me then was the lack of USB support on DOS. That is now
fixed.

Paul Lamar

--------------------------------------------------------------------------
-------- Original Message -------- Subject: Linux on netbook
and windows 7 Date: Fri, 20 Nov 2009 04:12:23 -0800 From: Rotary
Engine <rotaryeng@earthlink.net To: AAA Put this in the To box
<rotaryeng@earthlink.net



I won the SAE's e-book download netbook giveaway contest, they sent
me a brand new HP Mini-110. It has everything, came loaded with
windows 7 starter. Seemed like a good candidate for a Linux trial. I
downloaded the latest Ubuntu 9.10 netboot remix, burned iso cds.
Tried to make USB live image with USB creator, in both windows and
booting from the live CD (standard edition) on my tower, but couldn't
seem to get it to work. Unetbootin from sourceforge was able to
create a bootable thumb drive, then I created a bootable 4GB SD. They
both boot just fine, but have yet to figure out how to get the WiFi
connection up and running. Webcam works fine in ubuntu.


Everything seems straight forward, tho. I have to say maybe a bit
boring with the NBRM gui. I also stumbled on http://moblin.org/ this
looks like a much better gui, although it looks as though they are
still developing. They have gotten Intel on board, supporting their
Atom processor, so I expect a bright future. Also

have created a developer network similar to Apple's iPhone for
application development and distribution. I'll try to make a bootable
Moblin SD after work today.

As a side note, I just upgraded both my tower system and laptop from
vista to windows 7, only problem noticed so far is my epson cx3200
needs another driver, will have to sort that out with epson tech
support. It appears as though all installed programs came through
except for iTunes, the upgrade advisor informed me prior to upgrade
this would need to be reinstalled. That has been the smoothest
windows system upgrade I can recall. System resource usage is way
down, my tower now only uses 30% of installed memory at the end of
system loading, instead of the 45% it needed in Vista. Everything is
faster, rather pleased with the result. C. Smith

------------------------------

Here are some ideas for your new toy. See if it will go into command
mode or DOS mode. Don't laugh. Dos has some real time advantages. XP
will go into DOS mode. If it goes into DOS mode it may be possible to
do all sorts of real time hardware stuff like fuel injection
systems. Windows and Linux are multitasking which make them near
useless for real time hardware stuff. Too much background house
keeping going on.

If it will run DOS it will probably run Quick Basic Compiler that
can access the USB ports directly as serial ports in real time. I run
QB in XP all the time. Quick Basic has real time commands for
directly controlling hard ware including serial ports. It is small
enough that I can email it to you. It is very easy to learn. Many of
us older computer users already know how to program in QB. I have
tons of source code including a moving map program that takes in data
from a GPS. UPS GPS receivers are available. One can buy a USB to
parallel adapter kit that will out put 8 bits at a time with hand
shaking. Each bit could control an injector. The key is what is
avaible in USB as most note books or net books no longer have
parallel printer ports.

The other possibility is boot up DOS directly from a 3.5 inch floppy
disk.

I have a VIA EPIA PC mother board at the hanger that cost less than
$90 with the processor on board with floppy connector. It has a PCI
connector so a 4 parallel port card can be bought at low cost and
plugged in. The combination is way more powerful than you need but
the price is far far cheaper than some embedded systems that are
designed for hard ware control. A fuel injection program can be
written in minutes. The only thing missing is an A to D. Of course
any old mother board will work too.

http://www.via.com.tw/en/**initiatives/empowered/pc3500_**
mainboard/index.jsp<http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp



I'll get it up and running tomorrow with DOS and QB.


Paul Lamar
---------------------------------------------------------------------------------------
A local school gave me 12 computers they did not need anymore. These are
older units- P4 single core, some with parallel ports. I can strip the
mobos out if you need more test units.

Question: are you assigning 'pin' numbers to the outputs or how are you
determining the connections to injectors, coils, CAS, etc.

Kevin Alderman


Mental telepathy . I was thinking of setting up a 2nd DOS computer at home
to test I/O cards. If you have one WITHOUT printer port I would like to have it.

I have a dual printer port card I would like to test. It has a MOSCHIP
MSC9865 on it. I paid all of 18 dollars for it.

I don't have a schematic yet. I was thinking of using a screw terminal block
for the injectors with twisted pair wires. I also considered TV coax.
Real cheap for Coax. Shielding.


I'll send my shipping address and money for shipping.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2013 All world wide rights reserved.