This is the oldest message I can find on DOS-QB-EFI
Since that time I have looked at almost every single chip computer
for an EFI system. I keep coming back to this solution.
What stopped me then was the lack of USB support on DOS. That is now
fixed.
Paul Lamar
----------------------------------------------------------------------------
-------- Original Message -------- Subject: Linux on netbook and
windows 7 Date: Fri, 20 Nov 2009 04:12:23 -0800 From: Rotary Engine
<
rotaryeng@earthlink.net To: AAA Put this in the To box
<
rotaryeng@earthlink.net
I won the SAE's e-book download netbook giveaway contest, they sent
me a brand new HP Mini-110. It has everything, came loaded with
windows 7 starter. Seemed like a good candidate for a Linux trial. I
downloaded the latest Ubuntu 9.10 netboot remix, burned iso cds.
Tried to make USB live image with USB creator, in both windows and
booting from the live CD (standard edition) on my tower, but couldn't
seem to get it to work. Unetbootin from sourceforge was able to
create a bootable thumb drive, then I created a bootable 4GB SD. They
both boot just fine, but have yet to figure out how to get the WiFi
connection up and running. Webcam works fine in ubuntu.
Everything seems straight forward, tho. I have to say maybe a bit
boring with the NBRM gui. I also stumbled on
http://moblin.org/ this
looks like a much better gui, although it looks as though they are
still developing. They have gotten Intel on board, supporting their
Atom processor, so I expect a bright future. Also
have created a developer network similar to Apple's iPhone for
application development and distribution. I'll try to make a bootable
Moblin SD after work today.
As a side note, I just upgraded both my tower system and laptop from
vista to windows 7, only problem noticed so far is my epson cx3200
needs another driver, will have to sort that out with epson tech
support. It appears as though all installed programs came through
except for iTunes, the upgrade advisor informed me prior to upgrade
this would need to be reinstalled. That has been the smoothest
windows system upgrade I can recall. System resource usage is way
down, my tower now only uses 30% of installed memory at the end of
system loading, instead of the 45% it needed in Vista. Everything is
faster, rather pleased with the result. C. Smith
---------------------------------------------------------------------------
Here are some ideas for your new toy. See if it will go into command
mode or DOS mode. Don't laugh. Dos has some real time advantages. XP
will go into DOS mode. If it goes into DOS mode it may be possible to
do all sorts of real time hardware stuff like fuel injection
systems. Windows and Linux are multitasking which make them near
useless for real time hardware stuff. Too much background house
keeping going on.
If it will run DOS it will probably run Quick Basic Compiler that can
access the USB ports directly as serial ports in real time. I run QB
in XP all the time. Quick Basic has real time commands for directly
controlling hard ware including serial ports. It is small enough that
I can email it to you. It is very easy to learn. Many of us older
computer users already know how to program in QB. I have tons of
source code including a moving map program that takes in data from a
GPS. UPS GPS receivers are available. One can buy a USB to parallel
adapter kit that will out put 8 bits at a time with hand shaking.
Each bit could control an injector. The key is what is avaible in USB
as most note books or net books no longer have parallel printer
ports.
The other possibility is boot up DOS directly from a 3.5 inch floppy
disk.
I have a VIA EPIA PC mother board at the hanger that cost less than
$90 with the processor on board with floppy connector. It has a PCI
connector so a 4 parallel port card can be bought at low cost and
plugged in. The combination is way more powerful than you need but
the price is far far cheaper than some embedded systems that are
designed for hard ware control. A fuel injection program can be
written in minutes. The only thing missing is an A to D. Of course
any old mother board will work too.
http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp
I'll get it up and running tomorrow with DOS and QB.
Paul Lamar
---------------------------------------------------------------------------
During the most recent 25 years of my technical consulting career
I had
developed what must have been hundreds (or even thousands) of DOS
based
programs for the telecommunicanions industry. Many required
interfacing
with digital switching equipment, and they were lightning-fast.
My last
"release" would process 20,000 telephne calls/second on my small
Lenovo
notebook.
Imagine my panic when I found that Windows 7 would no longer run
my DOS
programs. However, Microsoft had promised that one could get a free
downgrade to WinXP, so I pursued that goal. After much runaround,
emailing, calling, etc., I found no one at MS that believed me. I
finally gave up.
I finally installed Linux 10.04, then installed XP within within
Oracle's Virtual Box. It serves my purposes well, though I
suspect it
is no longer "real-time" and is only good for software development.
I have since been told that Win7 XP Professional version will
still run
DOS, but the cheaper XP OEM version does not include the DOS
capabilities. I have never explored that any further.
BTW, I have owned two computers based on the VIA EPIA
motherboard. They
both ran a couple of years and died, for apparently different
reasons.
Each ran 24/7/365. I had a 64 Gig SSD in one of them, which I really
liked. I ran a Linux based VOIP telephne PBX system on both of
them for
a while, and they worked fine as telephone switches. I had them
networked together for a while. I later used one of them as my
desktop
for daily use with Ubuntu, and ran Oracle VBOX on it too. The
external
"brick" power supply and the very small internal DC/DC
voltage-converter
power-supply inside the box might have been my system's weak link.
RBerglund
Windows 7 Version 6.1.7601 runs DOS in a so called "Command
Prompt".
It is not real time and it does not have direct hardware access so my
QB moving map program does not work. You cannot access the par port
or RS232 directly. It must go through windows. That basically
defeats the point.
I just had that VIA board lying around. I don't necessarily
endorse it.
There are half a dozen different Micro ATX boards out there. Asus
always
makes a good product. Even Intel themselves are making micro ATX
mother boards.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.