Subject: Porting Air Cooled Wankels SAE Paper list
From: rotaryeng
Date: 5/16/2013, 12:50 AM
To: AAA-rotaryeng




Anybody know where I can find info on the best way to port them? It
seems that some are ported in such a way that the air flows through
the spinning rotor(s), "cooling" them and is recycled in a way as to
warm the intake air for better fuel burn...? Is PP the best way to
go always? It almost seems to me that it may be best to keep the
stock porting (maybe smooth everything out) AND PP them while also
blocking/rerouting the heated air from "recycling" for better hp.
Thoughts? Links to air cooled wankel porting? Thanks! Dan G.

It depends on how the rotor is cooled and what kind of rotor
bearings are used. If there is an oil cooling system and the rotor
bearings are the plain bearing type, p-porting is best for maximum
power. Unfortunately there are no such Wankel engines in production.

Paul Lamar


Hi!: the subject seems not being much addressed today, but there are
some SAE papers specific on air cooled Wankel RCEs:

Small Wankel Engines -Helmut Keller, Fichtel and Sachs, SAE paper
680572 The Rotary Engines of Yanmar Outboard Motor -Kojiro Yamaoka
and Hiroshi Tado, SAE paper 710581 Outboard Marine Corp.s Production
Rotary Combustion Snowmobile Engine Harry M. Ward et al, SAE paper
730119 Improvements of the Rotary Engine with a Charge Cooled Rotor
-K Yamaoka and H Tado, SAE paper 720466 Analysis of Light-Load
Performance in Rotary Engines, Toshiyuki Kohno et al, from Toyota,
SAE paper 790435 A Review of Curtiss-Wright Rotary Engine
Developments with Respect to General Aviation Potential, Charles
Jones, SAE paper 790621 Syvaros SP-440, Air Cooled, Rotary-Trochoidal
Engine, Andrei Adam, SAE paper 800974 Dvelopment of the Norton Rotary
Motorcycle Engine, D. W. Garside, SAE paper 821068 A Comprehensive
Study of Wankel Engine Performance R. Sierens et al, SAE paper
830332 The Effect of Alcohol Blends on the Performance of an Air
Cooled Rotary Trochoidal Engine, Marcel Gutman and Izu Luster, SAE
paper 840237 The Introduction of a New Ultra-Lite Multipurpose Wankel
Engine, Dankwart Eiermann et al, SAE paper 900035 Rotary Engine
Powered Ducted Fan for Aircraft Applications, Mike Griffith and Paul
Moller, SAE paper 900037 On the Wankel Engine with high Pressure
Recirculation of Unburned Gases Marcos Langeani, SAE paper 921444
(Close to the Yamaha and Kawasaki patents?) A Two-Dimensional
Computer Simulation of Exhaust Gas Behavior Inside a Rotary Engine
System, Yuji Hamai and Eisuke Outa, SAE paper 930681 The
Characteristics of Fuel Consumption and Exhaust Emissions of the Side
Exhaust Port Rotary Engine Ritsuharu Shimizu et al, Mazda, SAE paper
950454 Wankel Engine for Hybrid Powertrain Angelo Butti and Vincenzo
Delle Site, SAE paper 951769 Developed Technologies of the New Rotary
Engine (RENESIS) Masaki Ohbuko et al, Mazda, SAE paper 2004-01-1790
Numerical Analysis of Combustion and Flow Inside a Small Rotary
Engine for Developing an Unmanned Helicopter, Takafumi Yamada, Yasuo
Moriyoshi, SAE paper 2007-32-0098

Papers marked are not solely devoted to air cooling, or even are not
about this.

The general issues of Peripheral Porting vs Side Porting are
addressed in the two editions of the book Rotary Engine, by Kenichi
Yamamoto, Mazda, 1969 and 1981, both contain very different subjects,
and even when its copyrighted material, it can be found and
downloaded from the web.

As you know, SAE papers can be bought and downloaded from www.sae.org
, usual prices are around $24 per paper, and if you become a member a
reduction in prices applies, probably theres much more info than
this, but my envy in spending money just for curiosity is limited,
however, some spend much more with drug dealers, tobacco and alcohol,
and the diseases that come after.

If this is of help to you, and you arrive to build or modify a
working engine, please let us know.

Regards, salut +

Jose Gros-Aymerich Madrid, Spain


Thanks guys. I came across something interesting as well..http://www.nortonownersclub.org/history/rotary
-Seems the F&S and obviously the Norton SAE papers would shed more light on what the author of that article wrote.
Even more interestingly, Norton had more success by getting the throttle butterfly's as close to the trochoid surface as possible...seems the the slide-plate throttle would be the best option here, yet again! Looks like I have a lot more reading/digesting to do, LOL. Good stuff.
Dan G.

The two editions of the book Rotary Engine, by Kenichi
Yamamoto, Mazda, 1969 and 1981,
You can down load the books from here:


http://foxed.ca/index.php?page=rx7manual

Paul Lamar

The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.