Subject: Thousand dollar exhaust valves
From: rotaryeng
Date: 5/22/2013, 9:30 PM
To: AAA-rotaryeng



Each one of these thousand dollar defective exhaust valves represents
500 hours in my Continental O-470.

That's is how much it cost to replace them with a certified engine.


If the exhaust valve is leaking on an annual inspection you must
replace them as the rate of heat transfer from the exhaust valve to
the seat and through the guide is affected. That could lead to a
catastrophic failure with the head falling off and jamming the
piston engine.


For $3000 dollars you can probably buy a used RX8 engine.

Paul Lamar

$1000 bucks !!!! x3 + mechanic/workshop fees. That really puts
things into perspective, far out. Graeme Riley


I bet those are sodium valves. In less critical applications such as
automotive, the old way in the points and condenser days is to turn the
valve on a lathe till it is one degree difference in angle from the
seat. Sometimes they can lap them on the seat with grinding compound
when it is not badly damaged. I doubt that is in the Cont. manual as
approved method. Then came unleaded gas  (73) with the hardened valve
seats, it is automotive, we don't repair anything these days, we
replace. I doubt aircraft engines have hardened valve seats, they are
still in the stone age.

Tony Lam

The Rotary Engine News Letter. Powered by Linux. ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.