Subject: Fwd: Re: New airplane
From: rotaryeng
Date: 5/29/2013, 8:36 PM
To: AAA-rotaryeng


On Wed, May 29, 2013 at 11:35 AM, rotaryeng <rotaryeng@earthlink.net wrote:


My son and me signed a contract with team tango for an airplane. We are
planning on using a 13B with a turbo. We have a CNC mill setup that we
built ourselves by modifying a  manual mill to make it computer controlled.

We are planning on using aluminum front, mid and rear plates.

What would be the best PSRU and propeller to use?


  Zoltan Szakaly

Here are some ideas for you.

It is easier to do alloy end housing if you use p-ports.

Hoffman or MT electric variable pitch.

Paul Lamar



Thank you for the quick response and lots of useful information.
We are going to use P-ports. I am not sure if we can do a plasma spray
coating of the aluminum or just use steel inserts for the sidewalls.



Zoltan Szakal

I don't recommend plasma spray. Expensive detonation gun coating is the ONLY
stuff that holds up.

Best to do hardened steel inserts.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.